JKN-PHB1 is an acidic pH buffer, can be used to adjust the pH range and crosslinking time required for fracturing fluid crosslinking to ensure the stability and effectiveness of fracturing fluids.
Inquiry
Product Description
JKN-PHB1 is an acidic pH buffer, can be used to adjust the pH range and crosslinking time required for fracturing fluid crosslinking to ensure the stability and effectiveness of fracturing fluids.
Technical & Engineering Information
Zirconium crosslinker crosslinks in an acidic environment. JKN-PHB1 can adjust the pH of the fracturing fluid to the required range, control the crosslinking time, and optimize the physical and chemical properties of the fracturing fluid. Adjusting the pH of the fracturing fluid within a reasonable range can improve the crosslinking effect and improve the temperature resistance and shear resistance of the fracturing fluid.
JKN-PHB1 is compatible with most additives used in fracturing fluid systems.
Technical Indicators
Technical Indicators of JKN-PHB1
Item | Indicator |
Appearance | Transparent Liquid |
Colors | Colorless |
Odor | Pungent smell |
PH | <3 |
Density (20℃) | 1.0-1.1 g/cm3 |
Solubility | Soluble in water |
Harm | Acid corrosion |
Recommended Treatment
JKN-PHB1 is added to the gel prior to adding the crosslinker solution to provide the desired delay time for crosslinking.
JKN-PHB1 is added as a side stream to allow optimization of delay time without changing fundamental fluid stability and performance.
Packing and Storage
JKN-PHB1 is supplied in 53gallon(200L) high density polyethylene (HDPE) drums or 265gallon(1000L) IBC. Keep it away from extreme conditions such as places near flames or direct sunlight.
Shelf life is 2 years.